最新系列膠帶 Tesa tape newest series

tesa德莎-薄膜、纖維及紙膠帶
Tesa-film, fibre and paper based tape

產品編號 SN

基材
Based material

顏色
Color

厚度mm
Thickness

黏著力(N/25mm)
Adhesion

tesa 52304

薄膜
film

透明
transparent

0.05

7.5(張開面 open side) / 5.5(離型紙面 separate side)

tesa 52315

薄膜
film

黃色/透明
yellow/transparent

0.15

13.8

tesa 52321

薄膜
film

透明
transparent

0.21

15

tesa 52323


paper

白色
white

0.23

16.3

tesa 52325

薄膜
film

粉紅
pink

0.24

16.3

tesa 52326

薄膜
film

紅色/透明
pink/transparent

0.25

15

tesa 52331

軟薄膜
soft film

白色
white

0.31

10

tesa 52332

薄膜
film

白色
white

0.32

23.8

tesa 52345

纖維
fibre

白色
white

0.43

12.3

tesa 52350

軟薄膜
soft film

黑色
black

0.50

18.8

 

tesa德莎-彈性泡綿膠帶
Tesa-elastic foam tape

  產品編號
SN

    基材
Based material

 顏色
Color

 運轉厚度
Running thickness
(μ m)

 印前厚度
Pre-printing Thickness
(μ m)

   密度
Density

 黏著特性
Adhesion

tesa Softprint 52380

泡綿
foam

煤灰色
coal ash

380

480


low


strong

tesa Softprint 52382

薄膜強化泡綿
film strengthen foam

白色
white

380

440


high


strong

tesa Softprint 52500

泡綿
foam

煤灰色
coal ash

500

580


low


strong

tesa Softprint 52502

薄膜強化泡綿
film strengthen foam

白色
white

500

560


low


weak

tesa Softprint 52504

薄膜強化泡綿
film strengthen foam

白色
white

500

560


low


strong

tesa Softprint 52506

薄膜強化泡綿
film strengthen foam

白色
white

500

560


high


strong

tesa Softprint 52508

薄膜強化泡綿
film strengthen foam

白色
white

500

560


high


weak

 

tesa德莎- 一般印刷貼版膠帶
Tesa-general printing plate mounting tape

   使用版材
plate material

    被貼物
undertaking

       使用膠帶
usable tapes

        說明<
instruction

樹脂版
resin plate

印刷滾筒
printing roller

tesa 52310,52315,52320,52321,
52325,52326,52331,52338,
52350

膠帶之選用取決於所需的厚度,tesa貼版專用膠帶皆采用厚度均勻之薄膜制成,有极平整的厚薄度,容易貼附的特性,撕去時滾筒不殘膠,是您的最佳選擇。
The selection of tape due to the needed thickness. All these plate mounting tape are made of uniform thickness film, have the best uniform thickness, easy to adhere and no residue remained when tear off. It's your best selection.

橡皮版
rubber plate

印刷滾筒
printing roller

tesa
52330,52338,52345,52350

tesa貼版專用膠帶可輕易貼附於橡皮版之粗糙的背面,tesa52330是標准產品,如需較好的彈性及均勻的厚薄度,則52338及52350是您較好的選擇。
Tesa plate mounting tape can easily adhere to the rough back of plate. The standard product is tesa 52330. For better elasticity and uniform thickness, you'd better select 52338 or 52350.

樹脂版及橡皮版
resin and rubber plate

塑料片
plastic plate

tesa 52310,52315,52320,52321,
52325,52326,52330,52332,
52338,52350

如使用樹脂版印刷,建議使用52310,52315,52320/52321及52325/52326,如使用橡皮版則建議使用52330,52338及52350,如需永久貼於塑料片上,則可選用52332,因52332較強的黏度及高剪力,雖經長時間吊挂,仍可保完好如初。
For resin plate printing, you are suggested to use 52310, 52315, 52320/52321, 52325/52326. For rubber plate printing, 52330, 52338, 52350 will be better selection. For permanent stick on platic plate, 52332 should be chosen for its strong adhesion and high shear retardant, and it can be as perfect as initial after long time's hanging.

樹脂版及橡皮版
resin and rubber plate

套筒
sleeve

tesa 印刷業用貼版膠帶皆可使用
any tesa plate mounting tape are usable

tesa系列膠帶皆适用於鍍鎳或玻璃纖維套筒,但在使用玻璃纖維套筒時,請确定套筒表面之平滑,如此即使經過長時間,膠帶亦可輕易撕去不殘膠。
Tesa series tape are all suit for nickel-plating or glass fibre sleeve. On occasion of glass fibre sleeve, please be sure that the surface of sleeve are smooth so that the tape could be torn off with no residue left after a long term.

 

tesa德莎-特殊印刷膠帶
Tesa-special purpose printing tape

  使用版材
plate material

    被貼物
undertaking

     使用膠帶
usable tapes

       說 明
instruction

薄樹脂版
thin resin plate

橡膠包覆之表面
surface coated with rubber

tesa 52304

對於厚度0.76或1.14mm的薄版來說,tesa52304是您最佳的選擇,黏度較強的展開面需經由机器壓合於版材,黏度較弱的一面則貼於橡膠包覆面。
Tesa 52304 is your best selection for thin plate with thickness of 0.76 or 1.14mm. The open side with stronger adhesion should be press to stick to plate by machine, and the other side with weaker adhesion stick to the surface coated with rubber.

薄樹脂版
thin resin plate

泡綿包覆之套筒
sleeve coated with foam

tesa 52916

tesa52916的黏度兩面不同,黏度較強的展開面貼附於套筒上,另一面則貼於版上。
It has different adhesion of the two side of tesa 52916. The stronger open side stick to sleeve, the other side adhere to the plate.

MA或ME版
MA or ME plate
(nyloflex)

印刷滾筒或套筒
printing roller or sleeve

tesa 7319

tesa7319是特別研發配合MA及ME版,可輕易貼附於版上,撕去時亦不留殘膠。如配合2.75mm厚的版材效果更佳
Tesa 7319 are specially developed for MA and ME plate. It can easily adere to plate and has no residue left when torn off. Better effection to plate of 2.75mm thickness.

高品質网點印刷用樹脂版
high quality resin plate for grip printing

印刷滾筒或套筒
printing roller or sleeve

tesa Softprint
52380,52382,52500,
52502,52504,52506,
52508

tesa Softprint系列產品可使薄膜及紙張印刷運轉順暢,能符合高水平的凸版印刷之需求。如需印細小网點,建議使用52380,52500,52502及52504。如需同時印网點及滿版,建議使用52382,52506,52508。
The softprint series products smoothen the process of film and paper printing. They can meet the requirment of high quality letterpress. For tiny grip, using 52380, 52500, 52502, 52504 are suggested. If grip and full drop are printed at the same time, you'd better to use 52382, 52506, 52508.

 

  使用方法:請先將印刷滾筒清洗干凈,將tesa印刷專用貼版膠帶展開面貼於印刷滾筒或套筒上,撕去离型紙,再將版材貼於膠帶上。tesa印刷專用貼版膠帶之初期黏著力較低,适合重复撕貼,如上机運轉后,則黏度會增加,使版材能緊密接合。
Using method: First clean the roller, then stick the open side of tesa printing plate mounting tape to the roller or sleeve, tear of the separating paper, and stick the plate to the tape. The initial adhesion is weak, suitable for repeatly tear off and stick on. The adhesion will be strengthen when the machine is running, which make the tight joint to plate.

保存條件 Storage :請置於陰涼通風處,避免陽光直射 Store in cool and aired place, do not expose in sunshine.
 
聯系電話(Tel):86-769-85540548, 85301202 傳真(Fax):86-769-85322000
地址(Addr.):東莞市長安鎮 ChangAn Town, Dong Guan, China